Category: Tires and Rims

1971 Challenger ET Fueler rims with Hoosier Pro Street

Tires
Front Hoosier Pro Street 26×7.5-15
Rear Hoosier Pro Street 31×12.5-6

Rims
ET Fuelers
Front 15×6
Rear 16×11

70 TA Challenger spacesaver mounting location

I was putting my space saver back in my TA today and dont remember if it mounted to the first mounting hole or the higher one up I put it in the lower one as you look at the back of the car. I have it in but now there’s no room for the hook right now it jact laying on the spare. Ive seen the hooks mounted under the tire in the front which I can’t do there no room on the threaded rod that holds it down and ive also seen it mounted by the air canister which is correct and which hole does the…

Read more

Regarding front tire and wheel selection.

Hello!
Let me questions.

I’m trying to order new wheels and tires for my 70 Challenger, but the rear seems to be fine, but I’m concerned about the front wheels and tires.
The wheels and tires you are trying to install are
・American Racing VN615 VN6155865
15×8
Backspace 3.790 in

American Racing VN615
VN6155866
15×8
Backspace 4.50 in

Tire size 225/60/15

If I install either of these wheels and tires and move the steering wheel left or right, will it interfere with the frame or…

Read more

US Mags U110, Ridler 650

In search of 17×8 or 18×8 fronts, 18×9.5 rears . Either model listed above in chrome…..

Wheel Vintiques vs Factory Rally Wheel

Question — Has anyone put a wheel vintique 56 series next to a factory 15×7 rally wheel? Are there any differences? I have 3 15×7 original rally wheels and am thinking of buying 1 wheel vintique to complete the set but only if there are no differences…

14/7 Rallyes….

Hey guys.. I have a set of 14" Rallye Wheels with (nearly new) Goodrich TA’s on them.

I replaced them with the Road Wheels (pictured) and may want to sell them.

What should I expect to get for them? (I don’t have any current pictures of the Ral…

Fender Lip?

I have 255/50-17 tires on the back of my 72 Challenger with 8" wheels. When I have someone sitting in the back and go over a bump the driver fender hits the tire. The fender has quite a lip on it so wondering if using a wood block and hammer is th…