Category: Performance Upgrades

Since I am pulling the engine because of a blown head gasket (I hope from over heating ) I am thinking of replacing the intake manifold on my 1973 Cuda 340
4 speed with a Torker 340. Anyone here installed one? what did you think of it. thanks.

I am thinking about switching to roller rockers since the ones in my motor at 50+ years old. back in the day I used crane rockers on my blower motor and was very happy with them.
I see all kinds of different rockers out there now. what are the ones to …

I bought a set of speed master aluminum heads so I can run unleaded 93 and had them worked to assure everything was spot on. I also got a lunati voodoo 703 cam with lifters and springs. I was checking over the break in recommendation and they suggested…

Hey Guys,

So I got a ’73 Challenger (Base model) at Mecum recently and I’ve been going through what I want to do with it. My goal is to create a very fun street car that will perform well in town and on the freeway but still be a bit of an aggressiv…

So I’m building a stroked 426 Hemi (528ish) with 11-1 comp and looking for around 700 hp. I’ve been looking at my options for heads and so far I’m leaning towards the Stage V heads but I would like some feedback from some guys who have experience with …

I was thinking about buying a lunatic hydraulic roller cam and lifters. Anybody have any problems with the lunatic roller lifters?

I have a street/strip 72 challenger with a stock T handle slapstick.

I really want to make the upgrade to a reverse manual valve body. I would like to upgrade the shifter, but I am wondering if anyone has successfully fit an aftermarket shifter into …