Classic Mopar Forums » New Member Section http://www.classicmoparforum.com Guide to Classic and Antique Mopar Automobile Forums and Clubs Fri, 10 Feb 2012 16:10:04 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 New to the forum .. looking for tips on buying a 73 duster http://www.classicmoparforum.com/new-to-the-forum-looking-for-tips-on-buying-a-73-duster/ http://www.classicmoparforum.com/new-to-the-forum-looking-for-tips-on-buying-a-73-duster/#comments Tue, 06 Jul 2010 03:58:40 +0000 Lalo714 http://moparforums.com/forums/f4/new-forum-looking-tips-buying-73-duster-6782/ this will be my first muscle car if i get it... but i need some tips... like what i should look for and what i should watch out for... problem areas.... anything that will help... in the pictures is looks good... but thats the pictures...

this is what the guy says it has:

225 slant 6 with 1000 on the rebuild
Clifford 4bbl maninfold
edelbrock 500 cfm carb
lokar throttle and kick down cables
Clifford cam shaft
forged crank cut .20/.20
1.7 1.44 SI valves
ported head and polished on exuast only
66' block
KB 2.2l turbo pistons 1.5mm oversized (3.504 total bore)
Comp valve springs, locks, and retainers
comp pushrods
double timing chain from cox bros.
198 connecting rods
Total seal piston rings
3100rpm custom stall converter from edge racing converters
Clifford shorty headers ceramic coated
electronic ignition
7 1/4 rear end 2.73 gear ratio

Body has minor rust on driver/passenger side rocker panels.

give my some opinions on what you think about this info... thank you for your time ]]> http://www.classicmoparforum.com/new-to-the-forum-looking-for-tips-on-buying-a-73-duster/feed/ 0 Newbe from north Fl. http://www.classicmoparforum.com/newbe-from-north-fl/ http://www.classicmoparforum.com/newbe-from-north-fl/#comments Mon, 05 Jul 2010 20:38:28 +0000 flaboy63 http://moparforums.com/forums/f4/newbe-north-fl-6776/ Hello everyone John here from north fl.
Looking for a roof for a 68 charger ]]> http://www.classicmoparforum.com/newbe-from-north-fl/feed/ 0 newb from wi http://www.classicmoparforum.com/newb-from-wi/ http://www.classicmoparforum.com/newb-from-wi/#comments Mon, 05 Jul 2010 02:44:29 +0000 gazdecki78volare http://moparforums.com/forums/f4/newb-wi-6767/ Hi im a proud owner of a 78 volare roadrunner with a 360 four barrel thats cammed. Im trying to find some more info on swaping a 440 into it i normally build 240sx's so this is a totally new ball game. All tips are acepted iv had this car for about 5 years and i really want to make it something cool. Thanks
p.s iv never been on a forum before so im not sure on how all this stuff works so please bare with me:D ]]> http://www.classicmoparforum.com/newb-from-wi/feed/ 0 new to site with a tech problem http://www.classicmoparforum.com/new-to-site-with-a-tech-problem/ http://www.classicmoparforum.com/new-to-site-with-a-tech-problem/#comments Mon, 05 Jul 2010 01:07:42 +0000 grabbergreendart http://moparforums.com/forums/f4/new-site-tech-problem-6765/ have a 03 neon 2.0 16valve with manual tran. the problem is i noticed i have a battery light on and also seems that i lost any tourqe for climbing hill on highway. have to downshift to 3rd to maintain up to 45/50 miles per hour. 4th or 5th gear just drops in speed and motor starts to wanna chug.

ANY HELP? ]]> http://www.classicmoparforum.com/new-to-site-with-a-tech-problem/feed/ 0 Newbie from SoCal http://www.classicmoparforum.com/newbie-from-socal/ http://www.classicmoparforum.com/newbie-from-socal/#comments Sun, 04 Jul 2010 16:55:12 +0000 ctrain22 http://moparforums.com/forums/f4/newbie-socal-6760/ Hi all. From So California and getting my first Mopar project. 67 Plymouth Sport Fury convertible. Needs some (ok...a lot) of TLC. Will post picutres when I can.

Hoping to be able to get technical and emotional advice from you all.

First question I have is where do you get parts for these cars. I am used to working on A body GM, and parts are so readily available. Who are the best parts vendors?

Hoping for a fun experience! ]]> http://www.classicmoparforum.com/newbie-from-socal/feed/ 0 Newbie from SoCal http://www.classicmoparforum.com/newbie-from-socal-2/ http://www.classicmoparforum.com/newbie-from-socal-2/#comments Sun, 04 Jul 2010 16:55:12 +0000 ctrain22 http://moparforums.com/forums/f4/newbie-socal-6760/ Hi all. From So California and getting my first Mopar project. 67 Plymouth Sport Fury convertible. Needs some (ok...a lot) of TLC. Will post picutres when I can.

Hoping to be able to get technical and emotional advice from you all.

First question I have is where do you get parts for these cars. I am used to working on A body GM, and parts are so readily available. Who are the best parts vendors?

Hoping for a fun experience! ]]> http://www.classicmoparforum.com/newbie-from-socal-2/feed/ 0 Newbie from SoCal http://www.classicmoparforum.com/newbie-from-socal/ http://www.classicmoparforum.com/newbie-from-socal/#comments Sun, 04 Jul 2010 16:55:12 +0000 ctrain22 http://moparforums.com/forums/f4/newbie-socal-6760/ Hi all. From So California and getting my first Mopar project. 67 Plymouth Sport Fury convertible. Needs some (ok...a lot) of TLC. Will post picutres when I can.

Hoping to be able to get technical and emotional advice from you all.

First question I have is where do you get parts for these cars. I am used to working on A body GM, and parts are so readily available. Who are the best parts vendors?

Hoping for a fun experience! ]]> http://www.classicmoparforum.com/newbie-from-socal/feed/ 0 Newbie from SoCal http://www.classicmoparforum.com/newbie-from-socal/ http://www.classicmoparforum.com/newbie-from-socal/#comments Sun, 04 Jul 2010 16:55:12 +0000 ctrain22 http://moparforums.com/forums/f4/newbie-socal-6760/ Hi all. From So California and getting my first Mopar project. 67 Plymouth Sport Fury convertible. Needs some (ok...a lot) of TLC. Will post picutres when I can.

Hoping to be able to get technical and emotional advice from you all.

First question I have is where do you get parts for these cars. I am used to working on A body GM, and parts are so readily available. Who are the best parts vendors?

Hoping for a fun experience! ]]> http://www.classicmoparforum.com/newbie-from-socal/feed/ 0 Newbie from SoCal http://www.classicmoparforum.com/newbie-from-socal/ http://www.classicmoparforum.com/newbie-from-socal/#comments Sun, 04 Jul 2010 16:55:12 +0000 ctrain22 http://moparforums.com/forums/f4/newbie-socal-6760/ Hi all. From So California and getting my first Mopar project. 67 Plymouth Sport Fury convertible. Needs some (ok...a lot) of TLC. Will post picutres when I can.

Hoping to be able to get technical and emotional advice from you all.

First question I have is where do you get parts for these cars. I am used to working on A body GM, and parts are so readily available. Who are the best parts vendors?

Hoping for a fun experience! ]]> http://www.classicmoparforum.com/newbie-from-socal/feed/ 0 *** 2010 CHALLENGER MOVIE *** http://www.classicmoparforum.com/2010-challenger-movie-9/ http://www.classicmoparforum.com/2010-challenger-movie-9/#comments Sat, 03 Jul 2010 22:20:42 +0000 FAST CAR FILMS http://moparforums.com/forums/f4/2010-challenger-movie-6752/ HEY GUYS, I'M BRAND NEW TO THIS FORUM AND WANTED TO STOP BY & INTRODUCE MYSELF.

MY NAME IS M.G. CROSS, I'M A FILMMAKER LOCATED IN HOLLYWOOD, CA...CURRENTLY FILMING A FEATURE CALLED "CHALLENGER" - IT'S A LOW-BUDGET DEAL, BUT FEATURES A GHOST WHITE 2009 CHALLENGER IN THE STARRING ROLE.

YOU CAN FIND OUT MORE BY VISITING MY SITE @ WWW.FASTCARFILMS.COM

I ALSO JUST POSTED "PHOTO'S" FROM OUR SHOOT ON MY FACEBOOK @ http://www.facebook.com/pages/MG-CROSS/132821140069399?ref=search

FEEL FREE TO "LIKE" MY PAGE, WHICH SHOULD AUTOMATICALLY ADD YOU ON.

I WILL TRY & COME BACK TO THIS FORUM WITH MORE UPDATES IN THE FUTURE, BUT MAY BE TOUGH AS WE'RE FILMING 24/7 & UNDER DEADLINE. I WILL HOWEVER KEEP MY FACEBOOK UPDATED WITH FUTURE RELEASE DATES, TRAILERS, ETC. HOPE YOU ALL WILL HELP US GET THE WORD OUT TO MOPAR ENTHUSIASTS WORLDWIDE & SUPPORT OUR MOVIE !

CHEERS & GODSPEED,
M.G. CROSS
FILMMAKER


]]> http://www.classicmoparforum.com/2010-challenger-movie-9/feed/ 0 NEWBIE HERE http://www.classicmoparforum.com/newbie-here-8/ http://www.classicmoparforum.com/newbie-here-8/#comments Fri, 02 Jul 2010 12:48:14 +0000 HEMI-ITIS http://moparforums.com/forums/f4/newbie-here-6737/ I have been lurking for a while,finally signed up:rolleyes:So hello all you MOPARITES:D
Attached Images
File Type: jpg IMG_1850.jpg (87.8 KB)
]]> http://www.classicmoparforum.com/newbie-here-8/feed/ 0 mini trucker gone Mopar http://www.classicmoparforum.com/mini-trucker-gone-mopar/ http://www.classicmoparforum.com/mini-trucker-gone-mopar/#comments Fri, 02 Jul 2010 01:04:15 +0000 redspowerjams http://moparforums.com/forums/f4/mini-trucker-gone-mopar-6735/ I have built mini trucks for show for a long time and now i'm going over to the Mopar world. the name is Red and i just got a 67 Plymouth Fury III. it was a one owner and runs and drives like a dream. I love this car.. I know this is about to change my life when it comes to building for car shows and i don't mind at all..
]]> http://www.classicmoparforum.com/mini-trucker-gone-mopar/feed/ 0 Noob looking for a 70′ RR http://www.classicmoparforum.com/noob-looking-for-a-70-rr/ http://www.classicmoparforum.com/noob-looking-for-a-70-rr/#comments Wed, 30 Jun 2010 11:01:24 +0000 Wile E. Coyote http://moparforums.com/forums/f4/noob-looking-70-rr-6717/ Hey all,

New to the forum and admittedly a little lost. I got hooked on Mopar by a bud of mine about 6 years back. He took me to his hometown where his friends garage was full of Superbee's, Chargers, a couple cuda's and a clone superbird, Love a first sight! Ever Since then i have wanted to own one. I would hardly say that my 05' Dodge magnum is filling that gap. There is nothing wrong with the Wagon it's just to new and i find that older cars have more character. I have waited Six years to finally have my own, it's time. So I asked my friend how do I get started? he says "find a good forum and become familiar with what i am looking for". Well i have had my eye out for a 70' RR, i love the look of them and recently i got a ride in one I'm sold. so if anyone has any advice for me or knows where I can find a RR I would appreciate it. It doesn't have to be a #'s matching barn find, LOL. just needs to be in somewhat descent condition with potential. :D ]]> http://www.classicmoparforum.com/noob-looking-for-a-70-rr/feed/ 0 Just bought a 63 Polara http://www.classicmoparforum.com/just-bought-a-63-polara/ http://www.classicmoparforum.com/just-bought-a-63-polara/#comments Fri, 25 Jun 2010 12:30:19 +0000 Bryan http://moparforums.com/forums/f4/just-bought-63-polara-6664/ Hi,I just bought a 63 Polara a few days ago...Car needs alot of work but isnt as bad as it could have been..I got the 318 running & the front clip is off already..My girlfriend says Im obsessed ! The interior will be the biggest challenge..If anyone knows a good place to get parts for this car please let me know.. Thought it would be a good idea to join the forum..This is my first rebuild ! Thanks ! ]]> http://www.classicmoparforum.com/just-bought-a-63-polara/feed/ 0 Hello from God’s Country! (That’s Texas y’all!) http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/ http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/#comments Thu, 24 Jun 2010 23:53:51 +0000 mtandrews http://moparforums.com/forums/f4/hello-gods-country-thats-texas-yall-6662/ Hi. Trevor Andrews and I'm in San Antonio Texas. Figured I'd sign up and see what goes on 'round here! Got a few Mopars and have let a few go but we all know how that goes. Easy going and light-hearted (except for POLITICS! ;)) and I don't know everything but I know a lot about a little!!! I shoulda made my screen name Duster Fetish being I'm on my 4th one but this one I want to drive. The others with the exception of one started as drivers and got out of control. I have no idea how that happened! ]]> http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/feed/ 0 Hello from God’s Country! (That’s Texas y’all!) http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/ http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/#comments Thu, 24 Jun 2010 23:53:51 +0000 mtandrews http://moparforums.com/forums/f4/hello-gods-country-thats-texas-yall-6662/ Hi. Trevor Andrews and I'm in San Antonio Texas. Figured I'd sign up and see what goes on 'round here! Got a few Mopars and have let a few go but we all know how that goes. Easy going and light-hearted (except for POLITICS! ;)) and I don't know everything but I know a lot about a little!!! I shoulda made my screen name Duster Fetish being I'm on my 4th one but this one I want to drive. The others with the exception of one started as drivers and got out of control. I have no idea how that happened! ]]> http://www.classicmoparforum.com/hello-from-gods-country-thats-texas-yall/feed/ 0 just bought a 37 coupe http://www.classicmoparforum.com/just-bought-a-37-coupe/ http://www.classicmoparforum.com/just-bought-a-37-coupe/#comments Thu, 24 Jun 2010 21:39:49 +0000 37 newbie http://moparforums.com/forums/f4/just-bought-37-coupe-6660/ Well finally got back to the states and came across a 37 plymouth coupe. I am looking to keep it in original condition except for the drivetrain. Now what i am looking for is a bigger engine but one that matches up to original or close to the mounts. Also a tranny and steering box. Anybody got suggestions? I have heard that a 360 matches very well but i just want more umph to it but not so much raodster go. Any help would be great. ]]> http://www.classicmoparforum.com/just-bought-a-37-coupe/feed/ 0 new to me duster http://www.classicmoparforum.com/new-to-me-duster/ http://www.classicmoparforum.com/new-to-me-duster/#comments Tue, 22 Jun 2010 10:00:15 +0000 dukeneutron http://moparforums.com/forums/f4/new-me-duster-6633/ Hello everyone, back to the world of mopar's, had a 1974 duster when I was 19 now I replaced it. Need's work yet, but I'm super excited. Floor's are better then most newer car's in this stupid state. Body just has some surface rust, new mexico car, no engine but has a 3 and 4 speed that came with it. Set up for a small block and has the 8 3/4" rear end. Factory sublime green paint, under alot of other paint. All in all A pretty good place to start.


]]> http://www.classicmoparforum.com/new-to-me-duster/feed/ 0 New to the forum http://www.classicmoparforum.com/new-to-the-forum-2/ http://www.classicmoparforum.com/new-to-the-forum-2/#comments Sun, 20 Jun 2010 12:35:59 +0000 Ravensi http://moparforums.com/forums/f4/new-forum-6601/ Hello everyone. I'm new here. Look forward to being a part of the community. My name is Jason ]]> http://www.classicmoparforum.com/new-to-the-forum-2/feed/ 0 howdy http://www.classicmoparforum.com/howdy-15/ http://www.classicmoparforum.com/howdy-15/#comments Fri, 18 Jun 2010 15:39:38 +0000 67furywagon http://moparforums.com/forums/f4/howdy-6585/ New member here from Tacoma, WA. I just bought a 1967 Fury 1 wagon. Interesting car... it was built in Canada so I believe it has the poly 318. Should be fun trying to find parts :) I've had a number of old cars over the years and really love wagons. Looking to hang on to this one for awhile and will be doing some mild custom work.

Anyway, just wanted to introduce myself!
-mike
Attached Images
File Type: jpg claire.jpg (63.0 KB)
]]> http://www.classicmoparforum.com/howdy-15/feed/ 0 Hey new guy w/a tbucket….but it has a 440. http://www.classicmoparforum.com/hey-new-guy-wa-tbucket-but-it-has-a-440/ http://www.classicmoparforum.com/hey-new-guy-wa-tbucket-but-it-has-a-440/#comments Thu, 17 Jun 2010 20:24:17 +0000 1923tbucket http://moparforums.com/forums/f4/hey-new-guy-w-tbucket-but-has-440-a-6576/ So I have a mopar powered bucket, I joined to throw some questions out since im looking for a decent cam I figure this is the place to start. I'll post the car up in your photo section and a question up in the tech section anyways. ]]> http://www.classicmoparforum.com/hey-new-guy-wa-tbucket-but-it-has-a-440/feed/ 0 Hello from nb ont http://www.classicmoparforum.com/hello-from-nb-ont/ http://www.classicmoparforum.com/hello-from-nb-ont/#comments Thu, 17 Jun 2010 01:20:21 +0000 tiregod http://moparforums.com/forums/f4/hello-nb-ont-6571/ Wanted to drop a line and say hello!! I stumbled upon your forum while doing some research on a new project of mine, i was happy to have my answers verified on your forum!! So I figured I should join being that everything I drive are mopar based lol, however, they are all lifted!!

03 TJ Sport- Modified 8" LIft, 35 BFG Krawlers, and a few extra extras
98 Grand Cherokee- Modified 6" LIft, w/ 265's

New 2010 Project, - Custom chromoly tube truggy chassis build, w/ 98 zj318, A727 torquelite, w/divorced np205 t-case, custom lift tba, Dana 60's 4:10's locked, 39x13.50-17 BFG Krawlers on 17" beadlocks!! ]]> http://www.classicmoparforum.com/hello-from-nb-ont/feed/ 0 new from sc http://www.classicmoparforum.com/new-from-sc/ http://www.classicmoparforum.com/new-from-sc/#comments Thu, 17 Jun 2010 00:57:37 +0000 HDO http://moparforums.com/forums/f4/new-sc-6569/ Hey fellas

My name is Dagnall and Im from the SC. me and my brother bought a 66 fury III a several years ago but he wrecked it. My brother, dad and I are going in together to build up a 66 sport fury. I got on the forum to share the joy of my familys mopar. ]]> http://www.classicmoparforum.com/new-from-sc/feed/ 0 My new 75Dodge colt http://www.classicmoparforum.com/my-new-75dodge-colt/ http://www.classicmoparforum.com/my-new-75dodge-colt/#comments Wed, 16 Jun 2010 16:44:01 +0000 Rnsedla http://moparforums.com/forums/f4/my-new-75dodge-colt-6564/ Just got a 75 dodge colt, Swaped the Motor for a V8 318 from a dart
Runs okay But doesnt seem to have Full power, My guess would be New timing chain, Carb rebuild, Also the car runs and drives But Sputters at about half throttle, Or when i gun it

Just want a second oppinion Befor i rush out and spend the cash
THis is my first car And i Kinda wanna make it a little racer Any ideas TO make it any faster would be cool ]]> http://www.classicmoparforum.com/my-new-75dodge-colt/feed/ 0 new guy in reno http://www.classicmoparforum.com/new-guy-in-reno/ http://www.classicmoparforum.com/new-guy-in-reno/#comments Wed, 16 Jun 2010 05:08:52 +0000 mopar_padawan24 http://moparforums.com/forums/f4/new-guy-reno-6559/ my name is erick and i'm addicted to mopars.:D

i have a 03 dodge neon (broken for now), 05 ram 1500 4.7, 08 avenger (wives), and recently got a 39 dodge pickup. i also got a 360 and an unknown auto tranny. i was told they were pulled from a duster. i've looked up a few things about the motor and decided to build a 408 stroker.

my first questions are is it easier to pick and choose parts or buy a kit? i wanna make it sit low but not really sure how to. how can i tell what tranny it is? lastly what size rear end and gears should i put under it?

also i wanna keep it as mopar as possible. thanks:) ]]> http://www.classicmoparforum.com/new-guy-in-reno/feed/ 0 Scamp http://www.classicmoparforum.com/scamp/ http://www.classicmoparforum.com/scamp/#comments Tue, 15 Jun 2010 23:01:53 +0000 Ted Dugger http://moparforums.com/forums/f4/scamp-6553/ Hi All,
Can anyone give me a ballpark figure of what my 1972 all original slant 6 would be worth?Its been in family since it was new and was just wondering?I have a album of it for you to lok at.
thanksVan ]]> http://www.classicmoparforum.com/scamp/feed/ 0 New to Mopar form Atlanta http://www.classicmoparforum.com/new-to-mopar-form-atlanta/ http://www.classicmoparforum.com/new-to-mopar-form-atlanta/#comments Tue, 15 Jun 2010 16:21:56 +0000 Nomadci http://moparforums.com/forums/f4/new-mopar-form-atlanta-6550/ Hey what's up guys?!!? I've actually driven an SRT10 Ram1500 Quad cab since 06 but didn't think that really qualified me to join the MOPAR team. I just got my hands on a flip you over the seat 69 HEMI Roadrunner which makes me grin from ear to ear:D I love my Chevy's but there is a new BEAST in the cave!:eek: ]]> http://www.classicmoparforum.com/new-to-mopar-form-atlanta/feed/ 0 Hello from sunny Florida http://www.classicmoparforum.com/hello-from-sunny-florida-2/ http://www.classicmoparforum.com/hello-from-sunny-florida-2/#comments Mon, 14 Jun 2010 16:48:04 +0000 Barz813 http://moparforums.com/forums/f4/hello-sunny-florida-6540/ How goes it. Im new to this forum and new to anything MOPAR. I just bought an 89 Dodge d100 with a 318 and I am currently putting it through a full transformation and I will need some advice I can tell you that right now..Lol. ]]> http://www.classicmoparforum.com/hello-from-sunny-florida-2/feed/ 0 Hey… http://www.classicmoparforum.com/hey-9/ http://www.classicmoparforum.com/hey-9/#comments Sun, 13 Jun 2010 20:25:09 +0000 Moparfever4everr http://moparforums.com/forums/f4/hey-6530/ New guy from ND ]]> http://www.classicmoparforum.com/hey-9/feed/ 0 Hello http://www.classicmoparforum.com/hello-49/ http://www.classicmoparforum.com/hello-49/#comments Sun, 13 Jun 2010 05:25:02 +0000 Ted Dugger http://moparforums.com/forums/f4/hello-6524/ Hello All,
Im brand new here but hopefully not for long. I own a 1972 Scamp with the original slant 6.
Ted:) ]]> http://www.classicmoparforum.com/hello-49/feed/ 0 whats up from texas. http://www.classicmoparforum.com/whats-up-from-texas/ http://www.classicmoparforum.com/whats-up-from-texas/#comments Fri, 11 Jun 2010 23:49:33 +0000 sanchezj360 http://moparforums.com/forums/f4/whats-up-texas-6508/ Hello mopar people. I'm new here I just got my hands on a 73 challenger(traded for a 67 camaro).
any one want to help me decode it? The guy I got it from said it was a ralley but dont know. JH23G3B443820





]]> http://www.classicmoparforum.com/whats-up-from-texas/feed/ 0 Introduction http://www.classicmoparforum.com/introduction-5/ http://www.classicmoparforum.com/introduction-5/#comments Fri, 11 Jun 2010 14:24:05 +0000 Salty http://moparforums.com/forums/f4/introduction-6502/ New to the forums, but not mopars. In the past I've had a dart, 2 valiants and a polara. I recently purchased a '67 dart, 2 door hardtop. I plan on restoring as I drive. Needs a bit of work, but I feel like I finally have a car that's worth putting the time and $$ into. Will post pics soon. Should be a fun driver/restoration project. ]]> http://www.classicmoparforum.com/introduction-5/feed/ 0 Need a car ! http://www.classicmoparforum.com/need-a-car/ http://www.classicmoparforum.com/need-a-car/#comments Tue, 08 Jun 2010 03:52:21 +0000 chevyguy http://moparforums.com/forums/f4/need-car-6474/ Hi, Im a chevy guy looking for a cuda or challenger. Not looking to flip a car or get one at 1/2 price. At the same time im not looking to pay more than market value. I like 70 71 challengers and cudas. Motor cu in not really important,coupe or convertible ok. I want a done car, or one that doesnt need much[needing paint ok] because I dont have the knowledge or time to hunt down parts . I am flexible on price as far as what im looking to spend. Like survivor type cars w small motors over restored cares w big motors. Very flexible. looking to buy something in the next few months,and help appreciated or if anyone can lend a dumb chevy guy some advice! thanks I have alot of chevy parts and cars to trade as well. ]]> http://www.classicmoparforum.com/need-a-car/feed/ 0 Whats Up http://www.classicmoparforum.com/whats-up-4/ http://www.classicmoparforum.com/whats-up-4/#comments Sun, 06 Jun 2010 21:53:19 +0000 FullPullDakota http://moparforums.com/forums/f4/whats-up-6457/ Hey I got a 05 Dakota, 4.7 with a little work so far. Just love everything Mopar so thats why I'm here. ]]> http://www.classicmoparforum.com/whats-up-4/feed/ 0 Greetings http://www.classicmoparforum.com/greetings-7/ http://www.classicmoparforum.com/greetings-7/#comments Wed, 02 Jun 2010 12:49:22 +0000 Twister http://moparforums.com/forums/f4/greetings-6398/ I just bought a 1973 plymouth duster with a stock 318 an was surfing the web an came across this site.Its been helpful reading some of these threads so i decided to join. ]]> http://www.classicmoparforum.com/greetings-7/feed/ 0 Hey everone http://www.classicmoparforum.com/hey-everone/ http://www.classicmoparforum.com/hey-everone/#comments Tue, 01 Jun 2010 14:33:13 +0000 pjrenu1 http://moparforums.com/forums/f4/hey-everone-6386/ I saw a fair amount of mid 60s B bodies while visiting this site and decided to join. I am working on a 66 Satellite which I just installed a 360 magnum FI. Some day it will get done. I am now figuring out how to get the aod transmission in that small tunnel and it looks like work. Oh well. Welle hello to all PJ ]]> http://www.classicmoparforum.com/hey-everone/feed/ 0 New from michigan http://www.classicmoparforum.com/new-from-michigan-2/ http://www.classicmoparforum.com/new-from-michigan-2/#comments Mon, 31 May 2010 02:21:11 +0000 roadruner150 http://moparforums.com/forums/f4/new-michigan-6376/ Hello everyone. I just purchased a 69 roadrunner. It has all been restored from top to bottom. Tell me what you think.

http://www.youtube.com/watch?v=qK8MnlXMfHI ]]> http://www.classicmoparforum.com/new-from-michigan-2/feed/ 0 New here from NY http://www.classicmoparforum.com/new-here-from-ny/ http://www.classicmoparforum.com/new-here-from-ny/#comments Sun, 30 May 2010 17:25:30 +0000 19Fury63 http://moparforums.com/forums/f4/new-here-ny-6357/ Hello all, new member here from Rochester, NY.

Just recently purchased my first classic Mopar (and first classic vehicle also), always been a diehard Mopar fan so I'm happy to be involved.

Vehicle is a 1963 Plymouth Fury with a slant 6 225, 4-speed manual. The engine was recently re-built prior to my purchase, although I don't know what it was re-built with...all I know is it has "high performance pistons and cam" aside from that I have no idea. The car will be delivered soon to my house so I will get a better idea once it arrives.

Any advice you all can give regarding the slant 6 motor? Things to watch out for, concerns? Any good websites or places where I can get parts for this motor and vehicle?

Eventually I plan to swap it with either a 383 or 360 but that's a long time from now, or possibly fab up a turbo kit for it. In any event, I know I will need a new tranny no matter what I decide to do.

Sorry for the long intro, glad to be here :)

Jeff ]]> http://www.classicmoparforum.com/new-here-from-ny/feed/ 0 first MOPAR http://www.classicmoparforum.com/first-mopar-4/ http://www.classicmoparforum.com/first-mopar-4/#comments Fri, 21 May 2010 01:32:24 +0000 bentman http://moparforums.com/forums/f4/first-mopar-6265/ I've been checking out Mopar forums for about 2weeks. Cool Site. Lots of info & some pretty cool pics. I have a green 73 Roadrunner with a 360.
I'm from Deer Park, Tx. ]]> http://www.classicmoparforum.com/first-mopar-4/feed/ 0 new from tx http://www.classicmoparforum.com/new-from-tx/ http://www.classicmoparforum.com/new-from-tx/#comments Fri, 21 May 2010 00:14:42 +0000 johnyhemi http://moparforums.com/forums/f4/new-tx-6263/ hey guys new to the forum, names jonny, been into mopars since i was in the fifth grade, the car that got me into the car scene today was a 68 dodge charger that was near my house and since the first day i saw it i fell inlove with it i still havent been able to get a mopar but at the moment im looking for a duster or sumthing similar. well im new here so hey ]]> http://www.classicmoparforum.com/new-from-tx/feed/ 0 Old As Dirt http://www.classicmoparforum.com/old-as-dirt/ http://www.classicmoparforum.com/old-as-dirt/#comments Thu, 20 May 2010 16:09:20 +0000 Sgt. Veteran http://moparforums.com/forums/f4/old-dirt-6257/ I would just like to say hello to all the members of this forum and hope you all don't think I'm beyond my years for still being car crazy, I have been on the site a few times and really enjoy the vast amout of beautiful cars that the members have, just a pure pleasure for my old eyes to see these cars being enjoyed by people 55 years younger then me, I remember when they were all brand new lol. Looking very forward to talking with everyone and I will post some pictures as soon as I can, Thanks, Jake ]]> http://www.classicmoparforum.com/old-as-dirt/feed/ 0 Old As Dirt http://www.classicmoparforum.com/old-as-dirt-2/ http://www.classicmoparforum.com/old-as-dirt-2/#comments Thu, 20 May 2010 16:09:20 +0000 Sgt. Veteran http://moparforums.com/forums/f4/old-dirt-6257/ I would just like to say hello to all the members of this forum and hope you all don't think I'm beyond my years for still being car crazy, I have been on the site a few times and really enjoy the vast amout of beautiful cars that the members have, just a pure pleasure for my old eyes to see these cars being enjoyed by people 55 years younger then me, I remember when they were all brand new lol. Looking very forward to talking with everyone and I will post some pictures as soon as I can, Thanks, Jake ]]> http://www.classicmoparforum.com/old-as-dirt-2/feed/ 0 New to the mopar world http://www.classicmoparforum.com/new-to-the-mopar-world-2/ http://www.classicmoparforum.com/new-to-the-mopar-world-2/#comments Thu, 20 May 2010 07:23:38 +0000 Dartster http://moparforums.com/forums/f4/new-mopar-world-6255/ Hey getting a 66 dodge dart super excited! :D
Attached Images
File Type: jpg DSC01048.jpg (66.2 KB)
]]> http://www.classicmoparforum.com/new-to-the-mopar-world-2/feed/ 0 New to the mopar world http://www.classicmoparforum.com/new-to-the-mopar-world-2/ http://www.classicmoparforum.com/new-to-the-mopar-world-2/#comments Thu, 20 May 2010 07:23:38 +0000 Dartster http://moparforums.com/forums/f4/new-mopar-world-6255/ Hey getting a 66 dodge dart super excited! :D
Attached Images
File Type: jpg DSC01048.jpg (66.2 KB)
]]> http://www.classicmoparforum.com/new-to-the-mopar-world-2/feed/ 0 440 in Desoto http://www.classicmoparforum.com/440-in-desoto/ http://www.classicmoparforum.com/440-in-desoto/#comments Wed, 19 May 2010 00:58:37 +0000 46440Desoto http://moparforums.com/forums/f4/440-desoto-6247/ Hello, new to this forum and trying to get information and ideas. I have a 46 Desoto that someone put a 283/powerglide combo in. Yeah, I know. They also did a C-rap job. I've bought a used rv 440 and 727 transmission that I want to put in it. Over the years, I've seen a few old Mopars with big blocks. I thought that these were just interesting oddities and never delved into the finer things that it takes to do one of these. Now, I'm going to be doing one. Anyone got ideas for motor/transmission mounts, etc. and lots of things. If you know someone who has done one of these put them in touch with me. I would love to talk to them. Thanks, Bob ]]> http://www.classicmoparforum.com/440-in-desoto/feed/ 0 Mopar Newbie http://www.classicmoparforum.com/mopar-newbie-4/ http://www.classicmoparforum.com/mopar-newbie-4/#comments Tue, 18 May 2010 04:04:40 +0000 xtremegriz http://moparforums.com/forums/f4/mopar-newbie-6242/ Hey, My name is Richard and I just picked up a 70 Dart Swinger. 340, 4barrel, auto trans etc...
It's in excellent shape for a 40 yr old car but I am going to need some help finding the odd part
This looks like a good place to start!
Attached Images
File Type: jpg 70 Dart Swinger.jpg (65.7 KB)
]]> http://www.classicmoparforum.com/mopar-newbie-4/feed/ 0 318 ?? http://www.classicmoparforum.com/318-3/ http://www.classicmoparforum.com/318-3/#comments Tue, 18 May 2010 01:48:07 +0000 WV Coronet http://moparforums.com/forums/f4/318-6238/ I have a '56 Coronet with a small block V8 with a 3 speed stick trans. Will a '64 318 bolt to my bell housing?? I have very little experience with Mopars.
Thanks for any info you can give. ]]> http://www.classicmoparforum.com/318-3/feed/ 0 hello Im new here http://www.classicmoparforum.com/hello-im-new-here-2/ http://www.classicmoparforum.com/hello-im-new-here-2/#comments Mon, 17 May 2010 00:53:26 +0000 jeremy e http://moparforums.com/forums/f4/hello-im-new-here-6217/ My name is jeremy. I just got me & my family a 1973 duster. It has a 318 auto and it is very clean (no rust). It has 80,000 miles and only one owner. We are wanting to change it into a 350 hp cruiser;) ]]> http://www.classicmoparforum.com/hello-im-new-here-2/feed/ 0 hello Im new here http://www.classicmoparforum.com/hello-im-new-here/ http://www.classicmoparforum.com/hello-im-new-here/#comments Mon, 17 May 2010 00:53:26 +0000 jeremy e http://moparforums.com/forums/f4/hello-im-new-here-6217/ my name is jeremy i just got me & my famly a 1973 duster it has a 318 ,auto it is verry clean no rust it has 80,000 miles one owener we are wount to fix it in to a 350 hp cruser;) ]]> http://www.classicmoparforum.com/hello-im-new-here/feed/ 0 OVERDRIVE http://www.classicmoparforum.com/overdrive-2/ http://www.classicmoparforum.com/overdrive-2/#comments Sat, 15 May 2010 14:35:04 +0000 BIGJOHNSMOPARS http://moparforums.com/forums/f4/overdrive-6207/ Hi' i'm new to this stuff so bare with me. I have a few old mopars 65 Belvedere with 440 and 4 speed also 64 fury convertible thats not done. My love is the belvedere. I'm looking for some info it's 3:90 gears and runs about 3200 rpms at 55. I'd like to put an overdrive in it. I looked at TKO 5 speeds but heard they don't like to shift over 6 grand not that I do it all the time but I do and if I'm going to spend $3000 on a trans it should do that. Also looked at gearvender about same price and I like the gear spliter. I have heard the 833-A is the best trans you can get. I would appreciate any info thak's ]]> http://www.classicmoparforum.com/overdrive-2/feed/ 0