Archive for MoparForums.com
May
15
heater valve for 383
Posted by: | CommentsMy father inlaw has a 63 Newport with a leaky heater valve. I have a hard time finding information and am not sure if these are different from engine to engine. Anybody know where i could find one?
thanks!
thanks!
May
15
heater valve for 383
Posted by: | CommentsMy father inlaw has a 63 Newport with a leaky heater valve. I have a hard time finding information and am not sure if these are different from engine to engine. Anybody know where i could find one?
thanks!
thanks!
May
15
Widest tire I can use.
Posted by: | CommentsJust a quick question,for the experts. The center lines on my 1967 Coronet 500, are 15 inch. What would be the widest tire I can use without causing me rubbing problems ?
May
15
1970 Plymouth Fury III wheel and tire question
Posted by: | CommentsFirst hello all
I have a 70 Fury convertable with the stock rims and 225/75/15 tires, i am about to buy four new tires since the ones fitted are coming to the end of their lives, i was just going to go with another set of 225/75/15s and mount them on the stock rims then i thought maybe a wider set would be nicer,
so i guess my question is whats the set up i need? my Fury is lowered 3 in the rear and four in the front approx so im guessing 15x8 with zero offset 5x115.3 lug pattern and 235/70/15 tires (i want the white band type tire) but before i head to summitt with my hard earned have you guys got any advice about sizes etc
this car is basically my "daily driver" altho i dont actually drive it everyday (i ride a motorcycle) its my only car so i need my tire and wheel choice to remain practical, id love to throw a set of torque thrusts on it with some wider tires but i just dont think that would work for what i use the car for!
thanks in advance
a little lower than stock
my pup loves it too
I have a 70 Fury convertable with the stock rims and 225/75/15 tires, i am about to buy four new tires since the ones fitted are coming to the end of their lives, i was just going to go with another set of 225/75/15s and mount them on the stock rims then i thought maybe a wider set would be nicer,
so i guess my question is whats the set up i need? my Fury is lowered 3 in the rear and four in the front approx so im guessing 15x8 with zero offset 5x115.3 lug pattern and 235/70/15 tires (i want the white band type tire) but before i head to summitt with my hard earned have you guys got any advice about sizes etc
this car is basically my "daily driver" altho i dont actually drive it everyday (i ride a motorcycle) its my only car so i need my tire and wheel choice to remain practical, id love to throw a set of torque thrusts on it with some wider tires but i just dont think that would work for what i use the car for!
thanks in advance
a little lower than stock
my pup loves it too
May
14
’73 Dart Swinger with a 440
Posted by: | CommentsHey there. I'm about to pull the trigger on a 1973 Dart Swinger with a 440. It runs great and is in really REALLY good shape.
I know it has a 440 under the hood. Current owner says it has the tranny from the 318 that was in it originally. Non sure grip 8.25 rear end. Im guessing im gonna need to put in a 727 TF and an 8.75 in it. But I read that a 904(which shouldve been with the 318 wont bolt up to a 440. any help identifying what is what would be great. I am 100% sure the rear is an 8.25. The motor looks like a 440. Being sure about everything would be a good thing;) thanks!
Matt
I know it has a 440 under the hood. Current owner says it has the tranny from the 318 that was in it originally. Non sure grip 8.25 rear end. Im guessing im gonna need to put in a 727 TF and an 8.75 in it. But I read that a 904(which shouldve been with the 318 wont bolt up to a 440. any help identifying what is what would be great. I am 100% sure the rear is an 8.25. The motor looks like a 440. Being sure about everything would be a good thing;) thanks!
Matt
May
14
Newbie here from Evansville, IN
Posted by: | CommentsHey everyone! Matt McGuyer from Evansville, IN here. Im about to become a first time Mopar owner('73 Dart 440) and Im sure i have MUCH to learn from you all! thanks! I look forward to talking with you!
May
14
1957 Poly Dual 4 Barrel Intake
Posted by: | Commentsthis is a nice 1957 vintage dual 4 barrel intake for a 318 poly. it is in excellent shape. mopar casting # 1822004. $300. plus shipping. thanks, mike
