Author: Zymurgy

I said 10 years ago when I remove the cast exhaust manifolds again, I would ceramic coat them. I am very happy with the look and hope the external heat reduction will keep the paint from cooking off the bottom of my valve covers.

I had a post about swapping out my original 516 heads and after you guys comments I decided to recondition what I have.

I got lucky last Sunday and had a beautiful sunny day in Ohio to work in the unheated garage. They came off without any issue. The …

OK, I am going to attempt this. I came across a very informative video on how to do this. I have been interested in trying to do this myself for years. After watching the video I felt it was doable. When I then came across my NOS taillight for sale…

We had a nice first annual car show this weekend in my community. We were basically at capacity for the space of around 170 cars.

I love how there is always that guy showing his car which was ordered from the factory, and it’s claim of 1 or 1.

This o…

1970s Dodge Van Turned Boat Could Storm the Beaches of Margaritaville

I found this article interesting. I find it rather scary that a fireplace was an option on this boat. It is pictured inside on one of the photos and appears open flame wood burning …

Goldie I suspect has burnt valves. I am going to confirm this tomorrow. I have never performed any internal work on the engine, except change the timing belt and cam 10 years ago.

I am not looking for anything which will change her drivability. She h…

I had the power steering system rebuilt and have mounted the pump, but I am missing something when tightening the pump. There are three bolts 2 I can tighten down, but not the special one is which, only threaded on the last inch.

The way it is now i…