Author: volarebb
Tube between blower motor and firewall
Tube between blower / heater fan motor and firewall wanted. No A/C 1980 Volare.
Instrument Cluster Bezel
Wanted Silver No A/C No Radio Instrument Cluster Bezel in nice shape for a 1980 Volare. My car came like this but someone put holes in my bezel for gauges.
Any big block oil pan pictures on a F-Body
I am getting ready to swap a different big block into my Volare. The one in it now has a 187 oil pan with the notch for A and C body steering clearance. It does not look like the notch needs to be there. I could swap it to the new engine if I need to, …
383 Crankshaft thrust bearing question
I bought a 383 4 speed car with a rebuilt engine for the engine. I took it apart today. When I went to pull the transmission it would not come out. It turned out the input shaft on the transmission was mushroomed. Apparently the crank is not machined f…
Parts 8 3/4 3.91 4 Speed Swap
I bought a 1980 Volare for the engine and I am going to part the rest of the car out. I was going to try and keep both cars, but it is not going to happen. Rebuilt 8 3/4 3.91 gears. It was in a B-Body. The guy was a welder so he put the spring perches …
499 CI Big Block Stroker
499 Cubic Inch Mopar / Chrysler / Dodge / Plymouth Big Block Stroker Engine / Long Block. (I was told it was a 498 when I bought the car. Doing the math on the piston card says it’s a 499.) Very low miles / hours. Never on a race track. It is in a car I bought, but is too radical for me. I am putting a milder engine in my car. This engine is based on a 400. It has Diamond forged flat top pistons, Hughes forged connecting rods, Crower solid camshaft, Edelbrock heads, and roller rockers. I…