Author Archive

Nov
27

Dual Plane Intake Question on Magnum 5.9

Posted by: | Comments Comments Off on Dual Plane Intake Question on Magnum 5.9
I know Air Gaps are considered a good intake for a carbed Magnum. My build is not super hipo...just a street cruiser with a slightly lopey cam...weekend cruiser. Are there any dual-plane options that work from idle to 2500 or so. I'll probably mostly be in the 3-4k range and don't need the high end power. Would a 4 bbl M1 work better for me? Don't want Chinese Crosswind if I can avoid it. Also wondering about tall manifolds/car/air cleaner height as I am putting it in my 73 Challenger with...

Dual Plane Intake Question on Magnum 5.9
Comments Comments Off on Dual Plane Intake Question on Magnum 5.9
Nov
26

26″ radiator question/73 Challenger

Posted by: | Comments Comments Off on 26″ radiator question/73 Challenger
Do 360LA and 360 Magnums have the same inlet/outlet locations and sizes? Putting a 360 Magnum where my 318 LA was. Don't have new engine as yet.
Comments Comments Off on 26″ radiator question/73 Challenger
Nov
26

Bouchillon adapter…mates Gen3 hemi to 904/727/500/518

Posted by: | Comments Comments Off on Bouchillon adapter…mates Gen3 hemi to 904/727/500/518
This Bouchillon adapter allows you to bolt up your Hemi to a 904/727/500/518 trans. My project changed and I never used it or even took it out of the wrapper.. $120 mailed anywhere in the states.

727/904/500/518 to Gen 3 Hemi Flexplate

From their site:
Our Latest Improved Design Flexplate gives you the ability to install a 727, 904, 500 or 518 Transmission behind your 5.7L, 6.1L, 6.2L, & 6.4L Gen III Hemi. Spacer not required with this New Design Stamping. Unique Design allows for the...

Bouchillon adapter...mates Gen3 hemi to 904/727/500/518
Comments Comments Off on Bouchillon adapter…mates Gen3 hemi to 904/727/500/518
Nov
26

Use your 904/727/500/518 trans with Gen 3 Hemi

Posted by: | Comments Comments Off on Use your 904/727/500/518 trans with Gen 3 Hemi
This Bouchillon adapter allows you to bolt up your Hemi to a 904/727/500/518 trans. My project changed and I never used it or even took it out of the wrapper.. $120 mailed anywhere in the states. Thanks.

Cross posted in parts for sale also...hope that's ok.

727904SFNEW1.jpg
Comments Comments Off on Use your 904/727/500/518 trans with Gen 3 Hemi
Nov
25

Use your 727/904 trans with Gen 3 Hemi

Posted by: | Comments Comments Off on Use your 727/904 trans with Gen 3 Hemi
This Bouchillon adapter allows you to bolt up your Hemi to a 904 or 727 trans. My project changed and I never used it or even took it out of the wrapper.. $120 mailed anywhere in the states. Thanks.
Comments Comments Off on Use your 727/904 trans with Gen 3 Hemi
Nov
21

Would like some sage advice on 360 Magnum build

Posted by: | Comments Comments Off on Would like some sage advice on 360 Magnum build
Getting ready to build a 360 Mopar Magnum carbed engine for my 73 Challenger.
Not looking for a drag car...just a dependable cruiser with a bit of an attitude.
Would like somewhat of an old school “lopey� idle if possible.
Will have PS/AC, pro built 904 trans with 2200 stall and 27� tires.
3.23 to 3.55 rear end gears posi. Mainly a weekender/car show ride.

Here's a rough idea of what I am considering> Need some input as I am as old as dirt and not very tech-savvy.
Looking for 375 to 400 HP...

Would like some sage advice on 360 Magnum build
Comments Comments Off on Would like some sage advice on 360 Magnum build
Nov
18

Want clean standard bore 5.9 Magnum core

Posted by: | Comments Comments Off on Want clean standard bore 5.9 Magnum core
2001-2003 preferred. Low mileage, clean bores, no scarring. Don't need heads wiring/ecu or intake/exhaust. Could use roller rocker assemblies, timing cover, crank and AC and PS and Alt. brackets Tom 256/443.8846 NW Alabama
Comments Comments Off on Want clean standard bore 5.9 Magnum core