Author: RYO5566
I’m looking for this part!
I’m looking for this part, but I can’t seem to find it.
The name of the part seems to be “rear run and retainer”.
This is a rail that supports the rear of the quarter window, but the parts for the passenger seat side were not included.
Similar to the driver’s seat, there is also a stay to attach the rail to the outer wheel house.
I was looking for it in various shops such as e-bay, but I couldn’t find it.
My Challenger is a 70 year model.
There is also information that one side is not…
Aftermarket (AMD) quarter panel installation adjustment
I’m currently restoring a 70challenger.
We are proceeding with the restoration mainly on the rear part, but I have a question for you all.
As shown in the photo, there is an approximately 3/16 height difference between the left quarter panel and trunk lid panel.
The quarter panel is made by AMD, and the trunk lid panel is the existing original one.
The curved line on the right quarter panel is the same as the trunk lid panel.
The left quarter panel has not yet been fixed by…
Regarding front tire and wheel selection.
Let me questions.
I’m trying to order new wheels and tires for my 70 Challenger, but the rear seems to be fine, but I’m concerned about the front wheels and tires.
The wheels and tires you are trying to install are
・American Racing VN615 VN6155865
15×8
Backspace 3.790 in
American Racing VN615
VN6155866
15×8
Backspace 4.50 in
Tire size 225/60/15
If I install either of these wheels and tires and move the steering wheel left or right, will it interfere with the frame or…
About Deck Filler Panel Center Support
hello!
I have a question about Deck Filler Panel Center Support.
I’m currently installing a trunk lid torsion bar, but I’m wondering how it fits in the center support hook.
I would be happy if you could show me a picture of your car.
By the way, the ce…
I have a question about the trunk decklid.
hello!
I have a question about the trunk decklid.
I removed the spring nut attached to the decklid hinge during restoration and lost it.
Therefore, I installed a spring nut that can be obtained in Japan, but the groove is shallow and the hinge shakes…
body gaskets seals
hello! I purchased a body gasket at the summit, but there are unknown seals and gaskets. Where are the gaskets and seals shown in this photo used? thank you for reading it until the very end!
…
About the misalignment of quarter panel mounting.
Hello.
I’m currently repairing the rear of the vehicle, but I’m having a hard time because the shape of the quarter panel doesn’t fit.
As shown in the photo, there is a gap with the door panel and a gap with the rear glass.
The part where the yel…