I am working on a 77 Lebaron 318. When I was doing a test fit for everything, I noticed that the two center ports on the head are not covered by the intake.




---------- Post added at 01:33 PM ---------- Previous post was at 01:23 PM ----------

I am having a problem uploading photos. No way in tool bar to upload photos from computer.

Remember me.... it has been a long no progress winter.

We are looking at getting started on the project again. I have a few questions about how the parts that we are going to use will work.

http://www.summitracing.com/parts/LOK-KD-2904HT/

http://www.summitracing.com/parts/LOK-TC-1000HT/

http://www.summitracing.com/parts/LOK-SRK-4000/

http://www.summitracing.com/parts/HLY-20-36/

http://www.summitracing.com/parts/HLY-20-89/

http://www.summitracing.com/parts/HLY-20-7/

http://www.summitracing.com/parts/EDL-7803/

We have decided to go with a 650 Holley to start. http://www.summitracing.com/parts/HLY-65-80457/ bought used.

After some long serious contemplation we are going to use the stock cam for now and have decided not to pull the engine. (for now...)

77 Lebaron 318
Lean Burn Conversion done
Adding Holley 650
Edelbrock Intake