Author: Johnny Mac

Hey all,

Asking for opinions! Through the traps I get some oil spray out of the passenger side breather. Instead of a vac pump, or an evac kit…I think I will try something simple.

Below I took off the valve cover, and discovered it has a baffle (…

Hey all! Had an odd occurance today, and wanted to see if anyone one had any words of wisdom.

Many of you know I have a 600hp+ smallblock, that I bracket race, and occasionally street drive on e85.
Here’s what happened today.

Going Down the road, …

My father has about a 2400 foot driveway, and someone has made a game of throwing beer bottles in his driveway. Same brand every time, and always multiples. Clearly the same person every time. Bright yellow labels.

Very rural area.

Would love to …

All,

Time for our mopar sb lineup to get some love. I’d like to ask the masses to chime in with suggestions / observations for a BluePrint Engines Mopar SB cylinder head. (with a catch of course)

Here are some facts that are Non negotiable. So…

Would love to hear what my resident hemi engine builders would like to see in an aftermarket, designed from scratch, gen III engine block?

Splayed mains vs the 2/4 cross volts?
Extended cylinder bores?
Let’s hear it! All ideas welcome.

Well gents, you guys have helped me with everything from thermostat install to asphalt driveways, so here is today’s conundrum.

As many of you know, I built a pole building with radiant in floor pex heating. I pressure checked the " in floor&q…

FABO Friends,

Hoping someone can give me a PN or an application for a HARD TUBE and dipstick for a Gen III Hemi, VVT block, mid sump swap pan…with Headers, such as the one pictured below.

I’ve ordered in probably a dozen aftermarket, and OE tubes,…