Author: James in Texas

Moulding needed

James in Texas July 14, 2023

Hello
I need that moulding on a 73 cuda thar long black and screws to the passenger side bottom of dash that’s in front of ac and map light connects to.
Please help

Door glass washers or cowl plug

James in Texas June 23, 2021

I really need the metal washers to install the rollers or horizontal track on the 73 cuda. Or the cowl plug that goes next to the nox sensor. Or the red brake lense on the non rally dash bezel . Broken bezels needed as long as it has the lense. Please help

Door window installation screws

James in Texas January 24, 2021

Hi everyone
This is James in Texas and I have a 73 cuda. I am looking for the bolts, nuts and special washers that install the door windows also the 4 Phillips head screws that mount the front track to the door. Can anyone help me. thanks James

Interior door panel’s

James in Texas January 6, 2021

Hi everyone
I have a 73 cuda and I was curious how makes a good set of door panel’s and rear seat panels as well

Mopar 440 oil pickup tube

James in Texas November 29, 2020

Hi everyone. I got a 73 cuda with a 440 and the milodon 6qt hemi pan 30760 I believe. I tried 3 different milodon 18660 pickup tube and they just wont thread in. So I would like suggestions I tried a die but can’t get it lower because of the lip on t…

73 cuda with a 440 oil pan

James in Texas July 22, 2019

Hi
In am new to this and this is my first forum post. My name is James and I have a 73 cuda with a 440 and a 727.
My problem is that I put a extra capacity oil pan on and it sticks down below the cross member about 2 inches, with 14 inch rims it’s about 3 inches off the ground.
Will this be a problem and can I change it without pulling the motor? Thanks

View attachment 62013

View attachment 62014