Author: bulldog426

i’m running these kb step head dome pistons, and i found a good deal on a set of close chamber heads, but these pistons can’t be used with closed chamber heads because of the step head on them, i remember once it was mentioned to me on here to use closed chamber i could mill off the dome but i…

thinkin bout swapping to vp m5 methanol in my dads’ cuda, currently runs on the m1 methanol, running a 360 magnum, with iron r/t heads, .530 lift hyd roller cam, stock stroke mp forged crank, srp pistons, mp forged ibeam rods, 13:1 compression was running 10.5s on the motor with alot of blowby,…

whats the most lift that you can get away with without machining the valvguides down on 452 big block heads?? stock rocker arms, could i run a 509 purple shaft without machining the valve guides down?

a few years ago I bought an already built 500 stroker and it was a few years old then, engine still hasn’t ever been cranked but I don’t know where I put the cam specs for it and shift point info and all that and well all I remember is its a mechanical flat tappet with a .600 lift, and was…

a friend of mine is possibly buying a 73 challenger, the guy thats selling it says its numbers matching 340, the date on the block is right for the year of the car but how do you confirm if its numbers matching? or original engine? is there a differen…

i got a ralleye hood for a 71-74 charger i bought a few years ago and i’m not gonna use it so i was wondering how much they are worth nowadays?? so i’m gonna list it for sell and i’m trying to get an idea if they are worth what they use to be with the economy the way it is?? its rust free, only 2…

well a while back i rebuilt my boat engine, a 2 stroke and it was my first time tearing a boat engine down, and rebuilding, but i figured to myself that i have rebuilt car engines, 4wheeler engines etc before so i figured the boat shouldnt be hard, well i found the engine has roller bearings for…